Contents
Which conductor can reduce corona?
Methods of Reducing Corona Effects By Increasing Conductor Size: The voltage at which corona occurs can be raised by increasing conductor size. Hence, the corona effect may be reduced. This is one of the reasons that ACSR conductors which have a larger cross-sectional area are used in transmission lines.
What are the factors which affect corona?
Article shared by : ADVERTISEMENTS: There are numerous factors such as system frequency, system voltage, air conductivity, air density, conductor radius, surface of conductor, load current and atmospheric conditions, on which the corona loss depends.
What is the effect of stranded conductors on corona?
The number of strands of the conductor has a greater impact on the characteristics of positive than negative corona. Under conditions of high absolute humidity, corona conductance, thus also losses depending on conductor geometry can be higher for positive than negative corona.
What is corona formation?
As corona is formed due to ionization of air surrounding the conductors, there-fore, it is affected by the physical state of atmosphere. In the stormy weather, the number of ions is more than normal and as such corona occurs at much less voltage as compared with fair weather.
What is corona power loss?
When the potential difference between two conductors of transmission line raised beyond a certain limit, at a point is reached when a violet glow appears around the conductor surface with a hissing noise and ozone gas smell this phenomenon called Corona and this causes corona power loss in the transmission line.
At what voltage does corona occurs?
The separation between the plates is typically 5-10 mm. Positive corona discharge is normally used, mainly because of lower ozone production than with negative corona discharge. The corona voltage is in the range of 9-13 kV.
What is corona power?
Corona is a phenomenon associated with all transmission lines. Under certain conditions, the localized electric field near energized components and conductors can produce a tiny electric discharge or corona, that causes the surrounding air molecules to ionize, or undergo a slight localized change of electric charge.
What is corona and corona loss?
The corona effect produces the non-sinusoidal signal thus the non-sinusoidal voltage drops occur in the line. The corona power loss reduces the efficency of the line. The radio and TV interference occurs on the line because of corona effect.
What happen during the Ferranti effect?
What happens during the Ferranti effect? Explanation: In a medium or long transmission line when open circuited or lightly loaded the receiving end voltage is found more than the standing in voltage. This phenomenon of rise in voltage at receiving end of open circuited or lightly loaded line is called Ferranti effect.