Why am I not getting power to my headlights?
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. The cause: A burned out bulb, or a problem with the high beam switch or relay. The fix: Replace the bulb, switch, or relay.
How do I know if my headlight module is bad?
One of the most common symptoms of a faulty headlight switch is issues switching between headlight modes. If the headlight switch fails or wears out it can cause problems operating the headlights. A broken switch may only work on certain modes, or may cause them to come on and off intermittently and erratically.
What to do if both side of Your Headlights are not working?
Neither side works: If both headlights are dead, it’s probably not a problem with the bulbs, but it’s worth a check. The most likely scenario is that the fuse is bad. Remove the fuse for the headlights and check it. When a fuse is bad, it’s obvious because the filament will have a gap in it. You can also check it with a multimeter.
Why are the headlights not working on my Chevy?
A wiring issue will require a check of wires with a multimeter with the help of your vehicle’s schematics. Only the low-beams or high-beams work: If your headlights both work but only when the low-beams or high-beams are on, the problem is likely with the dimmer switch.
Why are my Chevy Trailblazer lights not working?
Still, headlight problems are no problem with the right information. Whether your Chevy TrailBlazer lights aren’t working, or your Chevy Corvette, the following diagnostic process will help you figure out why your Chevy’s headlights aren’t working.
What causes a burnt out light bulb on a Chevy?
A burnt out bulb is usually discolored and pieces of the filament will be loose inside the bulb. If a visual inspection shows the bulb is still good, there may also be a broken wire in the harness to that light.