Why is my Airtel dongle not working?

Why is my Airtel dongle not working?

To restart your dongle, unplug it and after ten seconds plug it in again. This will restart the dongle. You can also try plugging the dongle into a different USB port. Your SIM is correctly installed – your dongle won’t work if your SIM hasn’t been properly inserted.

How connect Airtel 4G LTE dongle?

Dongle

  1. * Comes with 10GB data free, valid for 30days.
  2. * Single user.
  3. * Plug and Play.
  4. * Easy to install Dongle application for quick connection/ access to the web interface.
  5. * Insert any Airtel registered sim into the Airtel Dongle – (Visit Airtel.com.ng/HBB/ for top up/recharge options)

How can I activate Airtel WiFi dongle?

And open your laptop and connect to the Airtel hotspot whose name is displayed as the name in the hotspot. Enter the default password and connect to the hotspot. Once your laptop is connect to the hotspot, open browser in your laptop and enter the 192.168. 1.1 in the address bar.

How do I fix a dongle not connected?

If the dongle has not connected, try:

  1. Removing the dongle and reinserting it.
  2. Using another USB port.
  3. Swap the data cable to the long double-ended cable, which supplies more power to the dongle using two USB ports.
  4. Removing the USB cable and restart your computer, then plug the cable back in.

How can I reset my Airtel dongle?

Steps to reset your Wi-Fi device to resume services:

  1. Switch on the modem & wait for lights to stabilize.
  2. Press and hold the reset button with the tip of pin/pen for 30 seconds and release.
  3. Modem power light will switch OFF and switch ON again.

How do I reset my 4G LTE router?

To reset your 4G LTE Modem to factory default settings using the Reset button:

  1. Locate the recessed Reset button on the back of your modem.
  2. Insert a straightened paper clip into the hole and press for at least five seconds.
  3. Release the button. The modem resets and reboots. This process takes up to one minute.

How do I setup my 4G LTE modem?

To configure an APN for 4G LTE Modem:

  1. Launch a web browser from a device that is connected to the modem.
  2. In the Sign In field, enter the modem password and click the Sign In button.
  3. Select Settings > Mobile > APN.
  4. To add a custom APN profile, click the Add button.

How can I reset my Airtel WiFi dongle?

How can I recharge my Airtel WiFi dongle?

Along with net pack, Airtel Payments Bank also offers easy dongle recharge….Data Card recharge via the App:

  1. Login to your Airtel Thanks App.
  2. Click on ‘Recharge’
  3. Click on ‘Data Recharge’
  4. Enter your registered name or number.
  5. Select the operator.
  6. Browse for plans or proceed to ‘Pay Now’

Why does my Airtel 4G dongle not work?

Still the Airtel 4G dongle shows as identified, shows up connected but cannot connect to Internet. I went to the diagnostic menu on the router and tried to ping google,com, both the domain as well as with the ip, but the ping does not go through. Any help with this would be greatly appreciated.

How do I connect my Airtel 4G Hotspot to my computer?

Those who are not familiar with configuring wireless routerscan follow the steps below. Connect the Airtel 4G hotspot device to your computer using the microUSB cable included in the box. Then press the button in the middle of the device for a few seconds until both the lights turn on.

What is the user name and password for Airtel 4G?

When you try to use the web management console of your Airtel 4G device, you will be prompted to enter the user name and password. The router is pre-configured with a default user name and password. You must enter this user name and password to access the functions from the web management console. Default user name: admin Default password: admin

Can a WiFi dongle connect to a mobile charger?

First You have to see that the dongle is wifi certified or not. If it is then you can connect it to the mobile charger USB port and connect the mobile charger to the electrical socket. After that you will receive wifi signals but if it is not wifi certified, then there is no way.