Contents
Why is my G drive not showing up on my Mac?
Normally when you plug in an external hard drive to your Mac’s USB port you will see it appear on the desktop (aka mount on the desktop). If the drive is not showing up on your Mac chances are it has not been formatted correctly, has been corrupted, or is faulty.
How do I get my computer to recognize my SSD?
You can open the BIOS for your computer and see if it shows your SSD drive.
- Turn off your computer.
- Turn your computer back on while pressing the F8 key on your keyboard.
- If your computer recognizes your SSD, you’ll see your SSD drive listed on your screen.
Why is my SSD not showing up in Disk Utility?
When I boot up from the original HDD, and I open Disk Utility, then the newly installed SSD is not showing up in Disk Utility. Then I swapped positions – I removed the original HDD and moved the SSD drive to the original HDD’s slot and then suddenly it showed up in Disk Utility while performing a fresh install (from a USB key).
Why is my SSD not working on my MacBook Air?
My answer will be helpful for those who are upgrading their SSD. Personally, I had a MacBook air early 2015 with 128 GB SSD. While upgrading to 512 GB SSD, it was not detected in the internet recovery mode. I tried both Disk Utility and Terminal commands.
How can I tell if my SSD is a disk?
When running the “diskutil list” the blank SSD just comes up as an unnamed, unformatted drive (key is to check it is the correct disk by looking at the capacity ie. mine is 500GB so it came up as an unnamed 500GB disk). After running eraseDisk (which takes about 5 seconds) the SSD was then “recognised” by Mac OS as a disk.
What to do with blank SSD on MacBook Pro?
Installed the “blank” SSD into the MacBook Pro, booted MacBook Pro into Recovery mode and then used Terminal prompt to format the SSD using the diskutil eraseDisk script.