Contents
Why is my Pontiac Grand Am not starting?
While there are a variety of reasons your Pontiac Grand Am won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.
How do you reset the security system on a 2003 Pontiac Grand Am?
Turn the ignition key to the “Off” position for 10 seconds. 3. Repeat this process 3 times. This should reset the Security light/system and allow you to start your car.
How do I reset my Pontiac Grand Am?
Turn the ignition to ON, with the engine off. Fully press and release the accelerator pedal slowly 3 times within 5 seconds. The reset is complete when you hear the chimes and the CHANGE OIL light goes out. However, if the light stays on and no chime is heard, you will need to repeat the reset procedure.
How do you start a Pontiac without a key?
How can I start my car without the ignition key? Remove the screws that are holding the electrical part (the part with the wires) and the mechanical part of the ignition switch together. Insert a flat-head screwdriver into the key hole and turn in the same direction as you would your key . This will start your car .
How can I bypass PassLock?
Thankfully this is an easy fix.
- Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
- Look at the dashboard and locate the theft system light.
- Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
What does it mean when the security light stays on in your car?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. With the security light being on there is a possibility that the vehicle will not restart once you cut it off.
How do you reset the PassLock system?
Can you disable PassLock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.
How do I know if my anti-theft system is bad?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.