Why is ShareMouse not working?

Why is ShareMouse not working?

Make sure that no “security” program such as “Antivirus/AntiSpyware”-scanner programs blocks network traffic of the ShareMouse keyboard hook. Please check that no other 3rd party program is simulating keyboard or mouse input on the PC which may prevent ShareMouse from activating the remote control.

Why is my wireless rechargeable mouse not working?

Fresh batteries are the cure for many wireless mouse problems. Verify it has been installed, to make your mouse ready to use. If the receiver is plugged in, and you’ve tried all other troubleshooting steps, try moving the receiver to a different USB port, if one is available. USB ports can go bad, making them unusable.

How do I resync my USB mouse?

Press and hold the pairing button on your mouse or keyboard for 5-7 seconds, then let the button go. The light will blink to show that the mouse is discoverable. The pairing button is usually on the bottom of the mouse. On your PC, select Start > Settings > Devices > Bluetooth & other devices.

How do I connect to ShareMouse?

Network

1. Open the ShareMouse “Settings” and switch to section “Network”.
2. Enable the password option and enter a password.
3. Repeat above steps on all computers you wish to group to a separate work place.

How do I stop ShareMouse from running?

To temporarily disable ShareMouse, click the task bar icon while holding the CTRL -key. Repeat this action to re-activate ShareMouse.

Is ShareMouse safe?

Our software includes a “keyboard hook” component to detect keystrokes. This is required by ShareMouse to transmit your keystrokes to the remote computer. Unfortunately, such a component is also misused by malware.

What to do when your wireless mouse does not work?

Wireless Mouse Not Working? 17 Things to Check

1. Replace/Recharge Battery.
2. Turn On Power Switch.
3. Be Within Range.
4. Remove and Plug Again.
5. Change USB Ports.
6. Restart Computer.
7. Remove Other USB Peripherals.
8. Control Cursor Speed.

How do I get one mouse to work on two computers?

There are a couple methods to control two different computers from one keyboard and mouse: either with a cable or with software. First, there is a cable called a KVM switch, which is short for “keyboard, video and mouse” switch. These let you share one mouse, keyboard and monitor between two computers.

How do I temporarily disable my mouse?

Using a mouse and keyboard

1. Press the Windows key , type touchpad, and press Enter . Or, press Windows key + I to open Settings and choose Devices, then Touchpad.
2. In the Touchpad Settings window, click the Touchpad toggle switch to the Off position.

Is ShareMouse a malware?

Can a USB mouse and keyboard work with sharemouse?

Compatibility issues – As the USB switch is connected between the computers and your input devices, the USB mouse can have compatibility issues and may not detect your USB keyboard and or USB mouse properly. ShareMouse does not require any setup or cabling. Launch the software and you are ready to go with many advantages:

Why is my sharemouse not connecting to my computer?

Make sure to disable any “MAC filter” in your router, that may prevent a network connection between the computers. If using a router or switch, try a direct crossover cable instead, to eliminate the risk that such devices are blocking ports. You can configure ShareMouse to use a specific network adapter in the network settings.

What to do if you have multiple sharemouse adapters?

If a computer is connected to the same network by multiple network adapters, disable automatic client search in the ShareMouse client management and specify the IP addresses of the computers manually. If using multiple network adapters simultaneously, each adapter must connect to a separate (!) subnet ( more info ).

Do you have to have the same password on all sharemouse clients?

If you configured a password on any ShareMouse client, make sure to configure the same password in all other ShareMouse clients of one work place. The mouse & keyboard must not be touched for a few seconds before you can remote control that PC.