How do I get to the GUI in Aruba switch?
The Aruba 2930F switches can be managed through a graphical interface that can access from any PC or workstation on the network by running r web browser and typing in the switch’s IP address as the URL.
How do I configure my Aruba switch?
To configure the AOS switch IP address of the out-of-band management port:
- Enable out-of-band management (oobm). AOS-switch(config)# oobm enable.
- Assign an IP address to the oobm port. AOS-switch(config)# oobm ip address 10.2.100.68 255.255.255.0.
- Add a default gateway to the oobm port.
- Save the configuration.
What is the default password for Aruba switch?
By default, the username is admin and there is no password. After the initial log on, the administrator is prompted to configure a password.
How do I manage my HP ProCurve switch?
How to: Configure a HP ProCurve switch
- Step 1: Connect your serial connection.
- Step 2: Conenct PuTTY.
- Step 3: Get the IP address.
- Step 4: Set time server.
- Step 5: Set SNMP community info.
- Step 6: Launch the web GUI.
- Step 7: Configure basic info.
- Step 8: Create VLANs.
What is the installation guide for the HP 5900 switch?
HP 5900 Switch Series Installation Guide Abstract This document guides you through installation of HP products, including installing the device, connecting to the network, hardware management, and troubleshooting. Part number: 5998-2852 Version 1 Document version: 5W101-20111231
What causes a hp 5900 switch to EMI?
All EMI sources, from outside or inside of the switch and application system, adversely affect the switch in a conduction pattern of capacitance coupling, inductance coupling, electromagnetic wave radiation, or common impedance (including the grounding system) coupling.
What should I know before installing a 5900 Routing Switch?
Read all of the safety instructions in 5900 Routing Switch Series Compliance and Safety Guide supplied with your device before installation and operation. To avoid any equipment damage or bodily injury caused by improper use, read the following safety recommendations before installation.
What are the mounting brackets for the HP 5900af?
Mounting bracket and rack mounting rail kits The HP 5900AF-48XG-4QSFP+ switches come with a pair of mounting brackets (see Figure 2) and a pair of chassis rails and a pair of slide rails (see Figure 3). Figure 2 1U mounting bracket kit Figure 3 Rack mounting rail kit (1) Chassis rail (2) Slide rail Rack-mounting procedure at a glance